CARRIAGE HOUSE DOORS
PRODUCT INFO:
CONSTRUCTION: Door frames are constructed using 1-3/8" thick finger-jointed West Coast kiln dried Hem/Fir Mortise and Tenon stiles and rails with shiplap joints at meeting rails. Door panels are constructed of 1/4" exterior glued Luan Mahogany plywood. Windows are grid style and are attached to the door frame. All Township doors over 12 feet wide have 1/4" Luan Mahogany plywood attached to inside of the bottom section for optimum strength and rigidity.
NOMINAL SPECIFICATIONS:
- Top & Bottom Rail widths: 4-7/8", Meeting Rail Width combined: 4-1/2"
- End Stile width: 4-7/8", Center Stile width: 9"
- Panels: 1/4" Luan Mahogany plywood
- Glass: 1/8" clear annealed
- Arches: Standard radius for doors up to 10' wide door are 15'-0" radius, those over 10' wide are a single 58'-0" radius or two 15'-0" radius arches (double arches)
- Finish: Unfinished, face sanded ready for finishing
STANDARD WIDTHS: 8'-0", 9'-0", 16'-0", 18'-0"
STANDARD HEIGHTS: 7'-0", 8'-0", 9'-0", 10'-0", 11'-0", 12'-0", 14'-0"
For ease of operation do not exceed 28" Section Height
OPTIONS:
Widths up to 20', heights up to 12', in one inch increments (180 max. sq. ft. total)
1/4" Rough Sawn Fir plywood panel
3/8" grooved Medium Density Overlay plywood with V-grooves 3"or 4" on center
3/4" Western Red Cedar or West Coast Hem/Fir raised panels
Solid Rail West Coast Hem/Fir wood frame (more suitable appearance for staining)
Flush back of bottom section with 1/4" plywood (standard on doors over 12 ft. wide)
Flush back of door 1/4" Luan plywood & insulate with 5/8" Polystyrene insulation
Decorative hardware
1/8" clear annealed glass standard, clear obscure and insulated glass optional
Low clearance, high lift and vertical lift track and hardware
HARDWARE: The Township Collection is equipped with 15" radius torsion hardware; track is 2" bracket mounted and has a 65" horizontal reinforcing angle. Quiet long life nylon rollers, non corrosive door fixtures and graduated hinges are standard. Doors 8' and 9 wide include one 2-1/4" galvanized strut per door; 16' and 18' wide doors include one 2-1/4" strut per section.